Skip to content
Drain Cleaning Columbia

Broken pipe, not just a clog

When cleaning is not enough: sewer line repair and replacement

Some laterals cannot be kept open by cleaning: the pipe has cracked, a joint has dropped, or a section has caved in. A camera inspection is the evidence. Repair starts once you know where the damage is and how much of the line it affects.

Call (803) 403-2293

The main repair routes

Spot repair

One bad section is dug out and replaced, with the rest of the lateral left as it is. Sensible when the camera shows a single break in otherwise sound pipe.

Full replacement by trench

A trench is dug along the line and new pipe laid. It is the plainest method and suits laterals that are failing along their length or need re-sloping.

Trenchless

Pipe bursting pulls new pipe through the old one, splitting it as it goes. Lining cures a resin sleeve inside the old pipe. Both need only small pits, which helps under driveways and big trees, but not every pipe suits them.

When trenchless fits, and when it does not

Lining needs a pipe that still holds its shape; a flattened or badly offset section has to be dug out first. Bursting needs room for the pits at each end and enough space from other buried lines. A sag that holds water stays a sag after lining, because the liner follows the old pipe.

Ask the company to explain why it recommends one method over another for your particular pipe, based on the camera footage, not a general preference.

Your side of the property line

Repairs between the house and the property line are the owner's responsibility under Columbia Water's guidance. If the camera shows the problem beyond the property line, report it to Columbia Water on (803) 545-3300 before paying for work there. Who owns the sewer line covers the details.

If the repair follows a Columbia Water notice from smoke testing, the city asks to be told once the work is done. The smoke testing page explains the form.

What happens on a typical replacement

  1. Locate

    The camera finds the fault and the plumber marks it on the ground. SC 811 marks the utilities.

  2. Permit

    The company finds out whether the city or county needs a plumbing permit for the work. The City of Columbia's plumbing permit application asks for the company's SC LLR license number and a copy of the signed contract.

  3. Dig or pit

    A trench or two small pits, depending on the method. Water use in the house stops while the old pipe is open.

  4. Connect and test

    New pipe is joined to the house drain and the remaining lateral, and often checked with a camera before the ground is closed.

  5. Restore

    Backfill, then grass, paving or landscaping. Ask beforehand what restoration is included.

Before you sign

  • Can I see the footage that shows the damage?
  • Spot repair, full replacement or trenchless: why that one here?
  • Does the price include the permit, the cleanout and the yard restoration?
  • What pipe material will you use?
  • How long will the house be without drains?
  • Is the warranty in writing, and what does it cover?

Told the line needs replacing?

Have the camera footage or report handy when you call, and ask the company to explain the options it sees for your pipe.

Talk to a local drain company

Say what the drain is doing and where in the house. The company on the call tells you its price and what it would do first.

Call (803) 403-2293

Calls may be recorded. See how the referral is paid for and how your details are handled.

Call (803) 403-2293