Washing the pipe, not just opening it
Hydro jetting
A cable machine bores a hole through a blockage. A jetter sends water through a nozzle at high pressure, which strips the build-up from the whole circumference of the pipe. It is the follow-up when the same drain keeps blocking.
Good fits and poor fits
Usually a good fit
- A kitchen line coated with grease that blocks every few months.
- Fine root hair after the main roots have been cut.
- Sand, silt or sludge lying in the bottom of a sewer lateral.
- Cleaning a line before a camera inspection or a liner goes in.
Ask first
- Pipe a camera has already shown to be cracked, offset or collapsed. Jetting can wash out soil around a break.
- Very old, thin or brittle pipe.
- A drain blocked solid with standing water and no way to let it out first.
- Any line no one has looked inside yet.
What the visit involves
The hose goes in through a cleanout, usually outdoors, so the water and what it loosens run away down the sewer rather than back into the house. Nozzles differ: some cut roots, some spread wide for grease. The plumber chooses one for the pipe size and the problem.
Many companies run a camera before jetting to make sure the pipe can take it, and again afterwards so you can see the result. The jetter is loud and the hose runs across the yard, so expect the work area to be busy while it runs.
Before you agree to jetting
- Have you looked inside with a camera, or will you before you start?
- Which cleanout will you use, and is there one outside?
- Would a cable clear this for now, and what does jetting add?
- Will I see the pipe afterwards?
Same drain clogging again?
Tell the company how often it has happened and what was done last time. Repeat clogs are the case for jetting or a camera.
Talk to a local drain company
Say what the drain is doing and where in the house. The company on the call tells you its price and what it would do first.
Call (803) 403-2293Calls may be recorded. See how the referral is paid for and how your details are handled.